Help Center

How Can We Help?

From common questions to in-depth walkthroughs, get practical guidance on DTF Transfers and connect with our team for fast, friendly assistance.

Press Settings

Set heat press pressure to 60 lbs. or the max pressure setting for your heat press. Set temperature based on your garment material.

275°F for Polyester & Tri-Blend
300°F for 50/50
310°F for Cotton

Pre-Press Garment

Pre-press garment for 3 seconds to ensure all moisture and wrinkles are removed.

Align + Press

Positioning

Place the transfer where you want it.
Use an alignment tool if available.
Tape it down with heat-resistant or painter’s tape.

Press Settings (by fabric)

Polyester & Tri-Blend: 275°F for 6-10 seconds
50/50: 300°F for 6-10 seconds
100% Cotton: 310–325°F for 6-10 seconds

PEEL

Peel film immediately after the press.

If Anything Lifts (Quick Fix)

Lay the film back down.
Re-press with more pressure and +15°F.
Still lifting? Increase heat in +15°F steps until it bonds.
Multiple presses will not damage the transfer.

Finish (Optional, Recommended)

For a matte/soft hand: Cover with parchment and re-press 3 sec.
For a glossy finish: Use a Teflon sheet instead of parchment on the final 3-sec press.

ORDER TRANSFERS

Frequently Asked Questions

DTF Transfers Tampa powers clean, consistent prints built for real production. This hub breaks down how we run jobs, the presets we recommend for sharp color and stretch, and practical tips to keep your press moving.

Check the FAQ library, view quick how-to clips, and borrow our proven settings to shorten your learning curve.

What exactly are DTF transfers?

DTF (Direct-to-Film) transfers are high-quality prints that can be pressed onto almost any fabric. Your design is printed onto a special film using vibrant inks and adhesive powder, then heat-pressed to create a durable, full-color print with a soft feel and excellent stretch.

What materials can DTF transfers be applied to?

DTF transfers work on cotton, polyester, blends, nylon, and even dark or light fabrics. They’re extremely versatile perfect for t-shirts, hoodies, bags, and more without needing pre-treatment or weeding.

What file type should I upload for my design?

We recommend uploading your artwork as a transparent PNG file at 300 DPI for the best print quality. Vector files (AI, PDF, SVG) are also great options if available. Make sure your background is removed before submitting.

What temperature and time should I press my DTF transfers at?

For most DTF transfers, use 305°F for 10–15 seconds with medium to firm pressure. Allow the print to cool for a few seconds before peeling (cold peel), then press again for 5 seconds with parchment paper for a perfect finish.

How fast will I receive my order?

Our typical turnaround time is 1–3 business days for production plus shipping. Rush options may be available depending on order volume reach out to us for specific deadlines or bulk requests.

Can I order just one transfer or do I need a minimum quantity?

Yes, you can order as few or as many as you need! Whether you’re testing a design or running a large batch, DTF Transfers Tampa offers flexible order sizes to fit your business.

Do you offer gang sheets or custom sizing?

Absolutely. We accept custom gang sheets where you can fit multiple designs on one film to save cost and material. You can upload your own layout or use our gang sheet builder tool (if applicable) before checkout.